nr |
name |
cat |
description |
manufacturer |
60 |
ARM60 |
mpu |
32-Bit MPU-RISC Core, Family |
ARM*, VTI |
60 |
ARM60L |
mpu |
General purpose 32-bit MPU, 30 MIPS, 305mW at 33MHz, 5V, Based on the ARM6 core, Family |
ARM* |
60 |
ARM60b |
mpu |
Quick, low-power MPU, Family |
GPSI* |
600 |
MAX600 |
power |
non-isolated 115V AC to DC converter that Maxim stopped selling to small businesses or even providing information about becauseof the liabilities |
Maxim* |
600 |
AD600 |
amp |
Dual* channel, low noise, wideband variable gain amplifiers, 0 dB to +40 dB gain, data |
AD |
600 |
AD600 |
amp |
dual VCA* 35MHz 0..+40dB |
AD |
600 |
ARM600 |
mcu |
32-Bit MCU Core, used in 86600, Family, Never made! |
ARM* |
600 |
HT600 |
consumer |
3**18 Series of Encoders, pinout |
Holte |
600 |
MAX600 |
power |
Low Cost AC-DC Regulator (110/220V AC to 5V DC -- Full Wave) |
Maxim* |
600 |
NE600 |
amp |
1 GHz low-noise amplifier and mixer |
Philips |
600 |
NE600D |
|
1GHz RF Gain Stage & Mixer, pinout |
Philips |
600 |
SA600 |
amp |
1 GHz low-noise amplifier and mixer |
Philips |
600 |
gsp600b |
|
www.icst.com/pdf/gsp600b.pdf |
ICS* |
6000 |
|
radio,i2c |
I2C-bus FM*/IF system and MPU-based tuning interface |
Philips* |
6000 |
OL6000 |
isol |
OI* logic 15Mb/s |
GI |
6000 |
TEA6000 |
i2c |
I2C chip |
Philips* |
6001 |
LMC6001 |
amp |
low input current opamp |
NS |
60024 |
LXP600A/2/4 |
telecom |
Low-Jitter Clock Adapters (CLADs) |
Level1 |
601 |
MAX601 |
power |
non-isolated 115V AC to DC converter that Maxim stopped selling to small businesses or even providing information about becauseof the liabilities |
Maxim* |
601 |
|
mpu |
1st Generation PowerPC RISC MPU for desktop computers, Family |
IBM*, Motorola |
601 |
6BP01 |
|
6B Series of modules and boards, data |
AD |
601 |
ADV601 |
|
Low Cost Multiformat Video Codec*, data |
AD |
601 |
MAX601 |
power |
Low Cost AC-DC Regulator (110/220V AC to 5VDC -- Half Wave) |
Maxim* |
601 |
MV601 |
receiver |
Remote Control Receiver , data (shtml needed) |
GPS |
601 |
PowerPC601 |
mpu |
The first member of the family providing economical performance for powerful desktop PCs. |
Motorola, IBM? |
601 |
SA601 |
amp |
1 GHz low-voltage LNA and mixer |
Philips |
6010 |
HI-6010 |
avionics |
ARINC 429 Transmitter/Receiver for 8 bit bus |
Holt IC |
6010 |
HT6010_20PIN |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
6010 |
HT6010_DIP18 |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
6010 |
MFC6010 |
|
op amp, pinout |
motorola |
6010 |
OL6010 |
isol |
OI* logic 15Mb/s OC* |
GI |
6010 |
TUA6010X |
dram |
single chip Mixer/Osc. + PLL* |
Siemens |
60101 |
ics60101 |
|
www.icst.com/pdf/ics60101.pdf |
ICS* |
6011 |
TMS6011 |
uart |
UART |
TI, AMI:S1883, GI:AY5-1013, SMC:COM2017, WD:TR1602 |
6012 |
AM6012 |
dac |
12-bit multiplying DAC CERDIP20 |
Philips |
6012 |
HT6012_DIP18 |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
6012 |
HT6012_SOP20 |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
6014 |
HT6014_DIP18 |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
6014 |
HT6014_SOP20 |
consumer |
3**12 Series of Encoders, pinout |
Holtek |
602 |
MAX602 |
power |
non-isolated 115V AC to DC converter that Maxim stopped selling to small businesses or even providing information about becauseof the liabilities |
Maxim* |
602 |
|
mpu |
PowerPC RISC MPU for cost sensitive applications |
IBM*, Motorola |
602 |
AD602 |
amp |
dual VCA* 35MHz -10..+30dB |
AD |
602 |
AD602 |
amp |
dual, low noise, wideband variable gain amplifier, -10 dB to +30 dB gain, data |
AD |
602 |
MAX602 |
power |
Low Cost AC-DC Regulator (8V RMS to 5VDC -- Full Wave) |
Maxim* |
602 |
NE602A |
osc |
Double-balanced mixer and oscillator DIL8, CERDIP8 |
Philips |
602 |
NE602AD |
mixer,oscillator |
same, SMD |
order from Barend |
602 |
NE602AN |
mixer,oscillator |
=NE612AN=SA602AN Succesful mixer/osc DIP8 |
order from Barend |
602 |
NE602AN |
|
Double Balanced RF Mixer/Oscillator, pinout |
Philips |
602 |
SA602A |
osc |
Double-balanced mixer and oscillator DIL8, CERDIP8 |
Philips |
602 |
an602 |
|
www.icst.com/pdf/an602.pdf |
ICS* |
6026 |
HT6026 |
consumer |
Remote Control Encoder, pinout |
Holtek |
603 |
|
mpu |
PowerPC RISC MPU, low power, Family |
IBM*, Motorola |
603 |
AD603 |
|
Low noise, voltage-controlled amplifier for use in RF and IF AGC* systems, data |
AD |
603 |
AD603 |
amp |
VCA* 90MHz |
AD |
603 |
PowerPC603 |
mpu |
Family A low-power, low-cost design also ideal for embedded applications requiring high performance |
Motorola, IBM? |
603 |
PowerPC603 |
mpu |
Family Workstation-level performance packed into a low-power, low-cost design ideal for desktop computers, notebooks, and battery-powered systems. |
Motorola, IBM? |
603 |
an603 |
|
www.icst.com/pdf/an603.pdf |
ICS* |
6030 |
HT6030_DIP18 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
6030 |
HT6030_SOP20 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
6032 |
HT6032_DIP18 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
6032 |
HT6032_SOP20 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
6034 |
HT6034_DIP18 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
6034 |
HT6034_SOP20 |
consumer |
3**12 Series of Decoders, pinout |
Holtek |
604 |
|
amp |
Mux* opamp |
NS |
604 |
|
mpu |
2nd generation PowerPC RISC MPU for desktop computers, Family |
IBM*, Motorola |
604 |
6BP04 |
conditioner |
Distributed, Analog and Digital I/O Signal Conditioners, data |
AD |
604 |
AD604 |
|
Ultralow noise, very accurate, dual channel, Linear-in-dB VGA optimized for time-based variable gain control, data |
AD |
604 |
HT604L |
consumer |
3**18 Series of Decoders, pinout |
Holtek |
604 |
NE604A |
radio |
High-performance low-power FM* IF system DIL16 |
Philips |
604 |
NE604AD |
|
MF, SMD |
order from Barend |
604 |
NE604AN |
|
High Performance Low Power FM* IF System, pinout |
Philips |
604 |
PowerPC604 |
mpu |
Family An advanced superscalar engine with multiprocessing support for sophisticated PCs and servers. |
Motorola, IBM? |
604 |
SA604A |
radio |
High-performance low-power FM* IF system DIL16 |
Philips |
604 |
ics604 |
|
www.icst.com/pdf/ics604.pdf |
ICS* |
605 |
AD605 |
amp |
Very accurate, low noise, dual channel linear-in-db variable gain amplifier, optimized for any application requiring high performance, data |
AD |
605 |
NE605 |
radio |
High-performance low-power mixer FM* IF system DIL20 |
Philips |
605 |
NE605D |
|
SMT version (SA605D) of NE605 |
order from Barend |
605 |
SA605 |
radio |
High-pen low-power mixer FM* IF system DIL20 |
Philips |
6057 |
TSA6057 |
i2c,synthesizer |
Synthesizer I2C bus max. 150MHz (FM*)- max. 30 MHz (AM*) |
order from Barend |
6057 |
TSA6057 |
radio |
Radio tuning PLL* frequency synthesizer DIL16 |
Philips |
6057 |
TSA6057 |
radio,i2c |
I2C-bus radio tuning PLL* frequency synthesizer |
Philips* |
606 |
AD606 |
amp |
50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output, data |
AD |
606 |
SA606 |
radio |
Low-voltage high-performance mixer FM* IF system DIL20 |
Philips |
6060 |
TSA6060 |
i2c |
I2C chip |
Philips* |
6060 |
TSA6060 |
radio |
Radio tuning PLL* frequency synthesizer DIL16 |
Philips |
6061 |
TSA6061 |
i2c |
I2C chip |
Philips* |
607 |
AD607 |
|
Low Power Mixer/AGC*/RSSI 3V receiver IF Subsystem, data |
AD |
607 |
SA607 |
radio |
Low-voltage high-performance mixer FM* IF system DIL20 |
Philips |
607 |
SA607N |
|
Low Voltage Mixer & FM* IF System, pinout |
Philips |
6075 |
AD607AR5 |
|
Receiver IF Subsystem, pinout |
Analog Devices |
608 |
AD608 |
|
Low Power Mixer/Limiter/RSSI 3V receiver IF Subsystem, data |
AD |
608 |
ADG608 |
mux |
3 V/5 V, 4-/8-Channel High Performance Analog Multiplexers, data |
AD |
608 |
SA608 |
radio |
Low-voltage high-performance mixer FM* IF system DIL20 |
Philips |
608 |
SA608N |
|
Low Voltage Mixer & FM* IF System, pinout |
Philips |
609 |
ADG609 |
mux |
3 V/5 V, 4-/8-Channel High Performance Analog Multiplexers, data |
AD |
609 |
FT609 |
|
2400bps serial commanded Stepper Motor Controller, pinout |
FerretTronics |