Chip Directory Host site

COMSOL the largest range of embedded development tools in Europe

Click on the first letter of the embedding tool maker you're looking for:
0..9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Embedding tool manufacturers: 'N'

The entries are sorted according to their abbreviation, not their full name.
See also the CAD program manufacturers.


New Micros
New Micros, Inc.
1601 Chalk Hill Road
Dallas, TX 75212
tel: +1-214-339-2204
fax: +1-214-339-1585
www.newmicros.com/
They sell 68hc11 based boards for around $100 dollars. They happen to have a large variety of peripheral boards too, so if you ever in the future want to experiment with A/D (up to 20 bits), stepper motor controllers, relays or SSR output boards, to say some, they have the boards you will need.
By the way, they sell for $99 (+tax+shipping) the NMIT-0020 and NMIX-0020 which comes with a 4x5 keypad controller and address decoding logic and connector for intelligent LCD modules connections. The 'T' is what they call a 'target' board, which means they have no power regulation or filtering, and some of the jumpers have been substituted by wires. This is the less expensive one ($99). The NMIX-0020 is a better solution for designing, because it comes with all the jumpers and the stacking connectors for adding the peripheral boards.
I have 2 of this boards and I am very happy with them.
I (the ChipDir author) have also used a New Micros' NMIX-0021/2/3 6811 board for some time without any problem. I always assumed it had cost much more...

Order scarce chips via the Chipdir

Nohau
Nohau Elektronik AB
Derbyvagen 4
S-212 35 Malmø
Sweden
tel: +46-40-592220
fax: +46-40-592229
info@nohau.se
other offices:
Nohau Corporation
51 E Campbell Ave
Campbell CA 95008
USA
tel: +1-408-866-1820
fax: +1-408-378-7869
Nohau UK Ltd
The Station Mill, Alresford
Hampshire SO24 9JG
England
tel: +44-1962-733-140
fax: +44-1962-735-408
Nohau Elektronik GmbH
Goethestr 4
75433 Maulbronn
Germany
tel: +49-7043-40247
fax: +49-7043-40521
Nohau Danmark A/S
Naverlands 2
DK-2600 Glostrup
Denmark
tel: +45-43-446010
fax: +45-43-446020
www.nohau.com/
Products:
Nohau EMUL-PC in-circuit emulators for 8051, 80c251, 51XA, 80c196,
80c296, 68HC11, 68HC16 and 683xx (CPU32)- families.
All european branch offices also distribute a full range of 3:d party
procucts, including design-tools for fuzzy logic and state/event,
compilers, debuggers, CAN/LON/USB-tools, PROM/PLD programmers.
DOS/Windows PC-based ICE with full support for all 8051 derivatives

See also


local CAD program manufacturers
local Makers of test equipment
www.cera2.com/ Has another list of tools manufacturers
www.embedded.com/ Embedded Engineering and tools
www.handyboard.com/ 6811 Handy Board
www.computer-solutions.co.uk/ Computer Solutions
www.hypersignal.com/ DSP software and tools for DSP chips and DSP acquisition boards
www.smtnet.com/ Surface mount technology and electronics manufacturing
Click on the first letter of the embedding tool maker you're looking for:
0..9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Goto: Main Mirror About Author
Register: Yourself Company
Feedback: Correction Addition Question
Order: Chips

Order scarce chips via the Chipdir

Viewable with any browser